Description
- Selected NOS Valvo black glass Germanium transistor
- Specially chosen TRIAD Magnetics steel-core transformer
- BI potentiometers
- Neutrik jack sockets
- Heavy duty footswitch (wired for true bypass)
- 3 position gain switch
- Gain trim pot for the HIGH gain mode
LEVEL – Controls the overall volume of the pedal.
GAIN SWITCH – Selects low, medium or high gain mode.
GAIN TRIM – Controls the gain level of the Broadcast. At higher settings the
high-end of the signal is gently rolled off.
LOW CUT – Attenuates the low-end of the Broadcast. Since this control lies
at the front end of the Broadcast’s circuitry, it is interactive with the gain
controls.
HIGH GAIN TRIM (trimmer located inside the Broadcast) – Adjusts the maximum gain available when in high-gain mode.
DC SOCKET – The Broadcast requires a DC power supply unit (PSU). Please ensure your PSU can supply 9v, a minimum current of 50mA and has a 2.1mm negative centre barrel plug. Any other type may damage your pedal. If you plan on sharing the same PSU with other pedals, we recommend using a PSU with isolated outputs, e.g. Voodoo Lab PP2.
CURRENT DRAW – 50mA maximum